Full preventative service: coil clean, filter replacement, drain flush, gas pressure check and electrical torque test. In Beaulieu this is corporate & commercial work on midwall split systems, attended within about 80 minutes of dispatch.On LG equipment specifically — dual inverter splits, multi v vrf and instaview refrigeration — the faults we see most in Beaulieu are outdoor inverter pcb ipm fault and blocked drain causing indoor water leaks.Every visit starts with a full diagnostic and a written quote before any part is fitted.Equestrian estate access with resident authorisation. Aircon Repairs & Servicing bookings in Beaulieu are logged against Block 16 so we can allow for power availability on site.
- Typical response window
- 80 minutes from Midrand & Waterfall Corridor
- Distance from Sandton CBD
- 21.3 km
- Municipal water hardness
- hard (205 ppm)
- Load-shedding schedule
- Block 16
- Access & compliance
- Equestrian estate access with resident authorisation.
- Typical installed systems
- Smallholding-style estate homes with multiple standalone systems.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R410a | HFC blend (A1) | 280-320 kPa at 7 degrees C evaporating | 2 600-3 000 kPa at 45 degrees C ambient | Most inverter splits, ducted systems, VRV/VRF and heat pumps installed since 2005. |
| R32 | HFC (A2L, mildly flammable) | 300-340 kPa at 7 degrees C evaporating | 2 700-3 100 kPa at 45 degrees C ambient | Current-generation inverter splits and heat pumps. |
| R22 | HCFC (phased out) | 480-520 kPa at 7 degrees C evaporating | 1 700-2 000 kPa at 45 degrees C ambient | Legacy splits and ducted plant installed before the phase-out. |
Common questions
Is an LG linear compressor worth repairing in Beaulieu?
On refrigerators still within their ten-year sealed system warranty, yes. Outside it, we quote the compressor and drier replacement against the value of the unit so you can decide on the numbers rather than a guess.
Do you work inside gated estates?
Regularly. Technician details, ID numbers and vehicle registration are submitted to the HOA or gatehouse before the appointment so access is cleared in advance.
Is scale really a problem for ice machines here?
Yes, it is the single biggest cause of lost output on this water supply. Scale insulates the evaporator, so the machine runs longer for less ice and eventually pits the plate. Regular descaling is far cheaper than an evaporator replacement.
There is water on the floor under my ice machine, can you find the leak?
We trace it wet rather than guessing: inlet valve weep, split distribution tube, blocked machine drain or a backed-up bin drain all present the same way. The water side is pressure-tested before we recommission.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.