Aircon Repairs & Servicing in Inanda is handled as sandton prime work: very large stands, ducted zoned HVAC and cellar cooling common. Technicians reach Inanda in roughly 45 minutes, 2.4 km from Sandton CBD.The work most often booked in this suburb is midwall split servicing, ducted central hvac repair, vrv / vrf system maintenance. Wine cellars, luxury ducted aircon, high-end integrated fridges and domestic heat pumps.Equestrian estate character; access via gated roads with visitor logging. Water hardness in Inanda sits at soft (110 ppm), which keeps scaling manageable but does not remove the need for an annual water-side check.Inanda falls in Block 4 for load-shedding, and repeated restarts on that schedule are the most common trigger behind inverter board and compressor failures we attend here, so surge protection is checked on every callout.

Typical response window
45 minutes from Sandton
Distance from Sandton CBD
2.4 km
Municipal water hardness
soft (110 ppm)
Load-shedding schedule
Block 4
Access & compliance
Equestrian estate character; access via gated roads with visitor logging.
Typical installed systems
Very large stands, ducted zoned HVAC and cellar cooling common.

Refrigerants we handle locally

GasClassificationSuction pressureDischarge pressureTypical use
R410aHFC blend (A1)280-320 kPa at 7 degrees C evaporating2 600-3 000 kPa at 45 degrees C ambientMost inverter splits, ducted systems, VRV/VRF and heat pumps installed since 2005.
R32HFC (A2L, mildly flammable)300-340 kPa at 7 degrees C evaporating2 700-3 100 kPa at 45 degrees C ambientCurrent-generation inverter splits and heat pumps.
R22HCFC (phased out)480-520 kPa at 7 degrees C evaporating1 700-2 000 kPa at 45 degrees C ambientLegacy splits and ducted plant installed before the phase-out.
R134aHFC (A1)80-140 kPa at -5 degrees C evaporating900-1 200 kPa at 45 degrees C ambientWine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps.

Inanda questions, answered

Do you charge a callout fee?

A standard callout and diagnostic fee applies and is quoted upfront. It is credited against the repair when you accept the quote.

My ice machine runs but makes no ice, is it worth repairing?

Usually yes. The four common causes (water inlet valve, water pump, scaled evaporator and a stalled harvest cycle) are all repairable at a fraction of replacement cost. We quote in writing after the diagnostic and tell you honestly when a machine is past economic repair.

Why is my ice cloudy or melting too fast?

Cloudy, soft ice means the freeze cycle is being cut short or the water is carrying too many dissolved solids. We test hardness and TDS on site, fit the right filtration, descale the plate and re-time the cycle so cubes freeze clear and hard.

Is scale really a problem for ice machines here?

Yes, it is the single biggest cause of lost output on this water supply. Scale insulates the evaporator, so the machine runs longer for less ice and eventually pits the plate. Regular descaling is far cheaper than an evaporator replacement.

Specific jobs in Inanda

Nearby areas

Request a callout or quote

Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.