New ice machine installation sized to actual daily demand, with correct water treatment, drainage, ventilation and commissioning documentation. In Bryanston this is sandton prime work on new installations systems, attended within about 50 minutes of dispatch.On Sub-Zero equipment specifically — built-in refrigeration columns, wine storage and integrated units — the faults we see most in Bryanston are control board and sensor faults and condenser fouling behind grille.Every visit starts with a full diagnostic and a written quote before any part is fitted.Several sectional-title clusters require HOA sign-off for outdoor unit placement and noise limits. Ice Machine Repairs bookings in Bryanston are logged against Block 9 so we can allow for power availability on site.
- Typical response window
- 50 minutes from Sandton
- Distance from Sandton CBD
- 5.8 km
- Municipal water hardness
- moderate (150 ppm)
- Load-shedding schedule
- Block 9
- Access & compliance
- Several sectional-title clusters require HOA sign-off for outdoor unit placement and noise limits.
- Typical installed systems
- Family homes on large stands, typically 4-8 indoor units plus a pool heat pump.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R134a | HFC (A1) | 80-140 kPa at -5 degrees C evaporating | 900-1 200 kPa at 45 degrees C ambient | Wine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps. |
| R448A | HFO/HFC blend (low GWP) | 50-75 kPa | 1600-2000 kPa | Modern commercial ice machines, cube and flake units, coldroom retrofits |
| R290 (propane) | Natural hydrocarbon (A3 flammable) | 30-50 kPa | 1000-1400 kPa | Undercounter and self-contained ice makers, nugget machines, back-bar units |
Common questions
Can a built-in Sub-Zero be repaired without removing the joinery in Bryanston?
In most cases yes. The units are designed to be serviced from the front through the grille and toe panel; full de-racking is only needed for sealed system work.
What size ice machine do I need?
Size on peak daily draw, not average: roughly 0.5 to 1 kg of ice per restaurant cover per day, more for cocktail bars and function venues. We calculate demand on site, then specify machine output plus bin storage and the water treatment your supply needs.
Do you charge a callout fee?
A standard callout and diagnostic fee applies and is quoted upfront. It is credited against the repair when you accept the quote.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.