Refrigeration Repairs in Inanda is handled as sandton prime work: very large stands, ducted zoned HVAC and cellar cooling common. Technicians reach Inanda in roughly 45 minutes, 2.4 km from Sandton CBD.The work most often booked in this suburb is under-counter fridge repair, wine cellar cooling unit repair, double-door fridge repair. Wine cellars, luxury ducted aircon, high-end integrated fridges and domestic heat pumps.Equestrian estate character; access via gated roads with visitor logging. Water hardness in Inanda sits at soft (110 ppm), which keeps scaling manageable but does not remove the need for an annual water-side check.Inanda falls in Block 4 for load-shedding, and repeated restarts on that schedule are the most common trigger behind inverter board and compressor failures we attend here, so surge protection is checked on every callout.

Typical response window
45 minutes from Sandton
Distance from Sandton CBD
2.4 km
Municipal water hardness
soft (110 ppm)
Load-shedding schedule
Block 4
Access & compliance
Equestrian estate character; access via gated roads with visitor logging.
Typical installed systems
Very large stands, ducted zoned HVAC and cellar cooling common.

Refrigerants we handle locally

GasClassificationSuction pressureDischarge pressureTypical use
R410aHFC blend (A1)280-320 kPa at 7 degrees C evaporating2 600-3 000 kPa at 45 degrees C ambientMost inverter splits, ducted systems, VRV/VRF and heat pumps installed since 2005.
R134aHFC (A1)80-140 kPa at -5 degrees C evaporating900-1 200 kPa at 45 degrees C ambientWine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps.
R600aHydrocarbon (A3, flammable)20-60 kPa at -25 degrees C evaporating600-800 kPa at 45 degrees C ambientDomestic fridges, integrated columns and under-counter units.
R404AHFC blend (near-azeotropic)40-60 kPa (approx. 2-4 bar)1500-1900 kPaOlder commercial ice machines, cube makers, ice bins and blast chillers

Inanda questions, answered

Do you charge a callout fee?

A standard callout and diagnostic fee applies and is quoted upfront. It is credited against the repair when you accept the quote.

Why is my ice cloudy or melting too fast?

Cloudy, soft ice means the freeze cycle is being cut short or the water is carrying too many dissolved solids. We test hardness and TDS on site, fit the right filtration, descale the plate and re-time the cycle so cubes freeze clear and hard.

Is scale really a problem for ice machines here?

Yes, it is the single biggest cause of lost output on this water supply. Scale insulates the evaporator, so the machine runs longer for less ice and eventually pits the plate. Regular descaling is far cheaper than an evaporator replacement.

There is water on the floor under my ice machine, can you find the leak?

We trace it wet rather than guessing: inlet valve weep, split distribution tube, blocked machine drain or a backed-up bin drain all present the same way. The water side is pressure-tested before we recommission.

Specific jobs in Inanda

Nearby areas

Request a callout or quote

Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.