Split and ducted wine cellar cooling units serviced for stable temperature and humidity control. In Illovo Boulevard this is sandton prime work on wine cellar systems, attended within about 40 minutes of dispatch.We work across every major brand installed in Illovo Boulevard, and diagnostics start from the plated design data rather than a guess.Condensate leaks traced to blocked drains, failed pumps, poor falls or icing before any panel is refitted.Building access cards issued at reception. Refrigeration Repairs bookings in Illovo Boulevard are logged against Block 6 so we can allow for power availability on site.

Typical response window
40 minutes from Sandton
Distance from Sandton CBD
4.3 km
Municipal water hardness
moderate (140 ppm)
Load-shedding schedule
Block 6
Access & compliance
Building access cards issued at reception.
Typical installed systems
Corporate VRF plant and canteen refrigeration.

Refrigerant data

GasClassificationSuction pressureDischarge pressureTypical use
R410aHFC blend (A1)280-320 kPa at 7 degrees C evaporating2 600-3 000 kPa at 45 degrees C ambientMost inverter splits, ducted systems, VRV/VRF and heat pumps installed since 2005.
R134aHFC (A1)80-140 kPa at -5 degrees C evaporating900-1 200 kPa at 45 degrees C ambientWine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps.

Common questions

What temperature and humidity should a wine cellar hold?

Twelve to fourteen degrees Celsius at 60 to 70 percent relative humidity. Drift outside that band usually means a failed humidistat, a leaking vapour barrier or a unit sized for a smaller cellar.

Can you work after trading hours?

Yes. Retail, restaurant and office work is routinely scheduled at night or early morning under a permit-to-work so trading is not interrupted.

How fast can you get to me?

Emergency callouts are dispatched to the next available technician, with the arrival window confirmed by SMS when the vehicle leaves.

Do you top up gas without finding the leak?

No. A weighed charge into a leaking system is money out the window, so the leak is found and repaired first, then the system is evacuated and charged to the plated weight.

Request a callout or quote

Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.