Bar, scullery and kitchen island under-counter units repaired on site. In Benmore Centre this is sandton prime work on under-counter systems, attended within about 40 minutes of dispatch.On Defy equipment specifically — domestic double-door, side-by-side and chest freezers — the faults we see most in Benmore Centre are inverter compressor board faults and water dispenser valve leaks.Every visit starts with a full diagnostic and a written quote before any part is fitted.Centre management booking for roof and plant access. Refrigeration Repairs bookings in Benmore Centre are logged against Block 4 so we can allow for power availability on site.
- Typical response window
- 40 minutes from Sandton
- Distance from Sandton CBD
- 1.9 km
- Municipal water hardness
- moderate (140 ppm)
- Load-shedding schedule
- Block 4
- Access & compliance
- Centre management booking for roof and plant access.
- Typical installed systems
- Retail refrigeration and packaged rooftop HVAC.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R134a | HFC (A1) | 80-140 kPa at -5 degrees C evaporating | 900-1 200 kPa at 45 degrees C ambient | Wine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps. |
| R600a | Hydrocarbon (A3, flammable) | 20-60 kPa at -25 degrees C evaporating | 600-800 kPa at 45 degrees C ambient | Domestic fridges, integrated columns and under-counter units. |
Common questions
Why is ice building up at the back of my Defy fridge in Benmore Centre?
That is almost always a defrost circuit failure: the heater, bimetal or defrost sensor. The ice blocks the evaporator, airflow drops and the fridge compartment warms up while the compressor runs constantly.
Can you work after trading hours?
Yes. Retail, restaurant and office work is routinely scheduled at night or early morning under a permit-to-work so trading is not interrupted.
Do you top up gas without finding the leak?
No. A weighed charge into a leaking system is money out the window, so the leak is found and repaired first, then the system is evacuated and charged to the plated weight.
What does an annual service contract include?
Scheduled visits, priority response between visits, a written condition report per unit and fixed labour rates for the contract year.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.