Preventative maintenance and repair for walk-in coldrooms, including panels, doors and control gear. In Atholl Square this is sandton prime work on coldroom systems, attended within about 40 minutes of dispatch.We work across every major brand installed in Atholl Square, and diagnostics start from the plated design data rather than a guess.Leaks are found before gas goes in: nitrogen pressure test, electronic sniffer and UV dye, then a triple evacuation and a weighed charge.Tenant coordination for shared plant. Refrigeration Repairs bookings in Atholl Square are logged against Block 4 so we can allow for power availability on site.
- Typical response window
- 40 minutes from Sandton
- Distance from Sandton CBD
- 3.1 km
- Municipal water hardness
- moderate (140 ppm)
- Load-shedding schedule
- Block 4
- Access & compliance
- Tenant coordination for shared plant.
- Typical installed systems
- Restaurant and deli refrigeration with split HVAC.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R134a | HFC (A1) | 80-140 kPa at -5 degrees C evaporating | 900-1 200 kPa at 45 degrees C ambient | Wine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps. |
Common questions
How quickly can a coldroom be back at temperature?
Once the fault is cleared, a well-insulated coldroom pulls back down within two to four hours. We advise on stock protection during that window.
Do you top up gas without finding the leak?
No. A weighed charge into a leaking system is money out the window, so the leak is found and repaired first, then the system is evacuated and charged to the plated weight.
Can you work after trading hours?
Yes. Retail, restaurant and office work is routinely scheduled at night or early morning under a permit-to-work so trading is not interrupted.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.