Preventative maintenance and repair for walk-in coldrooms, including panels, doors and control gear. In Norwood this is upper residential work on coldroom systems, attended within about 55 minutes of dispatch.We work across every major brand installed in Norwood, and diagnostics start from the plated design data rather than a guess.Leaks are found before gas goes in: nitrogen pressure test, electronic sniffer and UV dye, then a triple evacuation and a weighed charge.Restaurant strip requires after-hours work. Refrigeration Repairs bookings in Norwood are logged against Block 8 so we can allow for power availability on site.
- Typical response window
- 55 minutes from Rosebank & Parks Belt
- Distance from Sandton CBD
- 10.9 km
- Municipal water hardness
- moderate (140 ppm)
- Load-shedding schedule
- Block 8
- Access & compliance
- Restaurant strip requires after-hours work.
- Typical installed systems
- Homes plus a dense restaurant refrigeration cluster.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R134a | HFC (A1) | 80-140 kPa at -5 degrees C evaporating | 900-1 200 kPa at 45 degrees C ambient | Wine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps. |
Common questions
How quickly can a coldroom be back at temperature?
Once the fault is cleared, a well-insulated coldroom pulls back down within two to four hours. We advise on stock protection during that window.
Do you top up gas without finding the leak?
No. A weighed charge into a leaking system is money out the window, so the leak is found and repaired first, then the system is evacuated and charged to the plated weight.
Do you charge a callout fee?
A standard callout and diagnostic fee applies and is quoted upfront. It is credited against the repair when you accept the quote.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.