Preventative maintenance and repair for walk-in coldrooms, including panels, doors and control gear. In Chartwell this is luxury gated estates work on coldroom systems, attended within about 80 minutes of dispatch.We work across every major brand installed in Chartwell, and diagnostics start from the plated design data rather than a guess.Every visit starts with a full diagnostic and a written quote before any part is fitted.Smallholdings with long driveways; borehole water common. Refrigeration Repairs bookings in Chartwell are logged against Block 14 so we can allow for power availability on site.
- Typical response window
- 80 minutes from Fourways & Northern Suburbs
- Distance from Sandton CBD
- 18.5 km
- Municipal water hardness
- hard (205 ppm)
- Load-shedding schedule
- Block 14
- Access & compliance
- Smallholdings with long driveways; borehole water common.
- Typical installed systems
- Smallholdings with multiple standalone systems and borehole-fed hot water.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R134a | HFC (A1) | 80-140 kPa at -5 degrees C evaporating | 900-1 200 kPa at 45 degrees C ambient | Wine cellars, display cabinets, medium-temperature commercial refrigeration and some heat pumps. |
| R404A | HFC blend (near-azeotropic) | 40-60 kPa (approx. 2-4 bar) | 1500-1900 kPa | Older commercial ice machines, cube makers, ice bins and blast chillers |
Common questions
How quickly can a coldroom be back at temperature?
Once the fault is cleared, a well-insulated coldroom pulls back down within two to four hours. We advise on stock protection during that window.
Do you charge a callout fee?
A standard callout and diagnostic fee applies and is quoted upfront. It is credited against the repair when you accept the quote.
Why is my ice cloudy or melting too fast?
Cloudy, soft ice means the freeze cycle is being cut short or the water is carrying too many dissolved solids. We test hardness and TDS on site, fit the right filtration, descale the plate and re-time the cycle so cubes freeze clear and hard.
Is scale really a problem for ice machines here?
Yes, it is the single biggest cause of lost output on this water supply. Scale insulates the evaporator, so the machine runs longer for less ice and eventually pits the plate. Regular descaling is far cheaper than an evaporator replacement.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.