Full preventative service: coil clean, filter replacement, drain flush, gas pressure check and electrical torque test. In Woodmead this is luxury gated estates work on midwall split systems, attended within about 50 minutes of dispatch.We work across every major brand installed in Woodmead, and diagnostics start from the plated design data rather than a guess.Every visit starts with a full diagnostic and a written quote before any part is fitted.Office park reception induction and permit-to-work. Aircon Repairs & Servicing bookings in Woodmead are logged against Block 10 so we can allow for power availability on site.
- Typical response window
- 50 minutes from Fourways & Northern Suburbs
- Distance from Sandton CBD
- 8.4 km
- Municipal water hardness
- moderate (165 ppm)
- Load-shedding schedule
- Block 10
- Access & compliance
- Office park reception induction and permit-to-work.
- Typical installed systems
- Office parks, showrooms and canteens: VRF, coldrooms and display fridges.
Refrigerant data
| Gas | Classification | Suction pressure | Discharge pressure | Typical use |
|---|---|---|---|---|
| R410a | HFC blend (A1) | 280-320 kPa at 7 degrees C evaporating | 2 600-3 000 kPa at 45 degrees C ambient | Most inverter splits, ducted systems, VRV/VRF and heat pumps installed since 2005. |
| R32 | HFC (A2L, mildly flammable) | 300-340 kPa at 7 degrees C evaporating | 2 700-3 100 kPa at 45 degrees C ambient | Current-generation inverter splits and heat pumps. |
| R22 | HCFC (phased out) | 480-520 kPa at 7 degrees C evaporating | 1 700-2 000 kPa at 45 degrees C ambient | Legacy splits and ducted plant installed before the phase-out. |
Common questions
Can you work after trading hours?
Yes. Retail, restaurant and office work is routinely scheduled at night or early morning under a permit-to-work so trading is not interrupted.
Is a compressor replacement guaranteed?
Yes. Replacements are done with a system flush and new drier, and both part and workmanship are warranted, provided the original cause of failure is corrected.
How fast can you get to me?
Emergency callouts are dispatched to the next available technician, with the arrival window confirmed by SMS when the vehicle leaves.
Do you top up gas without finding the leak?
No. A weighed charge into a leaking system is money out the window, so the leak is found and repaired first, then the system is evacuated and charged to the plated weight.
Request a callout or quote
Send it straight to our WhatsApp for the fastest response, or call 069 268 0988 / email info@reyds.co.za.